250 TPI 6 Days
Keep your KTM in top shape
סוג אופנוע
Verify front (0.9 bar) and rear (1.0 bar) tire pressures are correct for your riding conditions.
Check chain slack is within 50-55mm. A loose chain can jump off, too tight causes wear.
Ensure front and rear brake fluid reservoirs are between min and max marks.
Check coolant level in overflow tank and top up if needed.
Check clutch, throttle, and brake levers for smooth operation. Ensure kill switch works.
Look under the bike for any fresh oil, coolant, or fuel leaks.
Check WP AER 48 air fork pressure. Remove the valve cap on the left (clutch side) fork leg — it's the only leg that holds air. Use a pump to set pressure to 10 bar (146 PSI). Also bleed excess air from both legs using a T20 Torx. Adjust compression (top white dial, right leg) and rebound (bottom flat-blade, right leg) as needed.